Відео

The best video on UA-cam at the topic 👍👍

My gun came with a none centered barrel (sits very low) so any suppressor added cause drag on the slide (wear marks and malfunctions). Sent back to Taurus, they put 26 round through it none suppressed (knowing already that it functioned with no suppressor, and that it only had issues when suppressed). I called after receiving the pistol back and was told that if it functions without a suppressor, they don’t care and will not be fixing anything. I had high hopes that Taurus was starting to turn around from the terrible company they’ve known to be in the past, unfortunately they are still the same company.

Irony lives in the fact that those who disparage the rights of others, do so under the protection of rights secured to do so in the same document. And defended by the same individuals who sacrificed so much to protect the disparager. Hypocrisy at its finest.

Thank you Mr Barrett. Now the board members who allowed Wayne to abuse my money. They need to go as well.

Very nice, but what's your opinion on repealing the NFA and deregulating suppressors machine guns and destructive devices

The one thing I don't like is the top of the trigger. If you hold the trigger finger high it will get pinched after firing because there is a gap that gets exposed after bringing the trigger all the way back.

M-70 Win wannabe... 🙄

Is this better than v7 pro?

An observation, the badge under the crown is not the cross of St. George but the cross of St. Dionysius, at this point let me remind you that it is a white cross on a blue shield (white cross on a blue shield are the colors to this day of the flags and insignia of the Greek Armed Forces - except for the Hellenic Navy - for the Army, Saint George is depicted in the middle of the cross, and for the Air Force, Archangels Michael and Gabriel are depicted).

1921 orig and no 1926 Cutt’s

My first accurate rifle was and still is, a Winchester 52C with a Unertle scope.

I own the Gen 2 rifle from Ruger, one thing that isn't mentioned is the factory at Ruger uses RED LOCTITE on the threaded end of muzzle, so any hopes of putting a silencer at the end isn't easy at all. Have to super heat the end of barrel and torque it. Way to go Ruger.... NOT!

What empire ?

Can't use that gun in IDPA, why, because it's to heavy!

Why does Ruger continue with the "lawyer trigger"? Why a 12 gauge recoil pad on a 6.5 Needmore? Looks like video game "wannabe sniper" marketing hype. No thanks.

A rim fire round is not as reliable as a center fire round. I have a Taurus TX22 as a plinker at the range, and it has all kind of failures all the time. It’s your life. Get a 9mm.

Just got my great grandfathers taken apart and found the reason it was no longer shooting for me, wasnt that it was mever ever cleaned, but that the firing pin return spring was broken in about 10 pieces. Im sure it was still firing after the spring broke, but was only after it broke into so many peices that it stopped

I have the 5.25 . Love it

This is ahead of its time and underrated

Jesus. I’ve been waiting for this pistol. We want everything the G19 gives but in a slimmer package. The Rost Martin is unlike other “compacts” be it is slim. Same dimensions as the G48 and as slim as the Sig Tacops. But with a much better trigger. The word budget devalues how good this pistol is. Carrying it is a breeze because it’s lighter than the Tacops and the Hellcat Pro yet you lose nothing vs other compacts. SHTF-G17 Gen5 EDC- summer G43x EDC- cool weather G19 Gen5……Nope not any more. It will be the RM1C in the 17+1 configuration

Ol wuudie 😂

When discussing the bolt you didn’t mention that the handle is threaded for aftermarket bolt knobs. I really like the Pure Precision ‘slim’ bolt knob. IMO, it smoothly integrates with the handle, gives a significant improvement in feel over the round factory knob, and looks proportionally correct.

I have owned a Remington 700 all my life until recently when they got more interested in profit than quality. I now own a X-Bolt in 280 Remington and with my reloads I couldn’t be happier!😊

The Thompson submachine gun - heavy, expensive, and claw-hammer reliable. IIRC even the M1A1 cost the US gov't somewhere around $44 in 1943 - which is one reason they switched to the M3 Grease Gun. The M3 and M3A1 cost about $18.

I personally want to thank those black servicemen for their service in both WW1 and WW2. Many Americans can only now recognize the resistance and persecution these brave men endured! God Bless ALL WHO SERVED!

Isn’t it true that enfields carry more rounds in a clip than the 1903?

I am grateful to the youtube peoples for really discussing Melvin Johnson's firearms. I knew they existed but I did not know many details about them, or the fact that they were used by the ParaMarines.

Sounds like a bargain

I like Ruger firearms; have several of them, myself. What I don't like is the way they make their 15 and 25 round 10-22 magazines. The ones I bought have under -sized boxes, and move around terribly in the mag well. I've spoken to Ruger service department, but due to Illinois' stupid new laws, all Ruger can do is replace them with 10 round mags.

The 5.7 × 28 is a good round especially over 75 yards vs most handgun rounds the cost of the ammo vs 9mm is substantially more even a carbine rifle in 5.7 × 28 10 - 16 inch would be nice the problem for me is 223/556 is more effective and cost for ammo is close and I'd prefer a fullsized pistol 4.5 -5 inch barrel in SIG 357 or 10mm over 5.7 × 28 if ammo was 15 dollars for 50 rounds like 9mm until then its a no go l like the 30 supper carry and TCM 22 a few years back l had a RIA TCM 22 /9mm combo double stack 1911 and was getting TCM 22 ammo for 16 dollars for 50 rounds but sold it to buy a used SIG P320 fullsize with many upgrades it is 40SW / SIG 357 combo for 430 dollars gun looks new l think SIG 357 or 10mm is a better more effective round over 5.7 × 28 even at 100 yards

i got one of these, it is very nice, but the whole retro cardboard box was a huge letdown... why not a presentation box?

From a 303" to a 300" or 7.62...we lost 3 thousandth of an inch to the diameter of the bullet

👍🏽🤠 you had me at gunmetal gray

Fluted barrels are ugly

i have a glock 26 and glock 43x. i like my shield plus the best. i like that it has a safety.

Sounds like nice features so how accurate is the rifle?

Rangers Lead the way

Yanks for bring back the phyton, I love mine along with my 1969 colt SAA Frontiers 😊

I was fortunate enough to get in on the 80s Sks with a 100 dollars worth of Cosmoline😂 For 50 bucks Man all that yellow box Norinco we shot everything from deer to red clay river banks 😂 If only we had known But that’s not what we were thinking about in 1985

I have it in .308 it's a good rifle very accurate

And by Australians in Vietnam

I really like this rifle. My question would be whether or not the more forward mounted pic rail due to the rear iron sight prevents you from having sufficient eye relief with some scopes. I would like to mount a LPVO on it which may present a problem. Any thoughts?

Cool rifle. My question would be whether or not the more forward mounted pic rail due to the rear iron sight prevents you from having sufficient eye relief with some scopes. I would like to mount a LPVO on it which may present a problem. Any thoughts?

the problem with these kind of videos is that they say stuff without explanation.

I was dumb enough to get one. A year later, nothing but light primer strikes. It's trash

Nice video

That thing is fugly as hell though

My grandfathers were there, Jesse B Davis, 4th ID 8th IR, and Benjamin Compton, 4th ID 12th IR.

It was a fun gun. At the end of service in Canada, you put the safety on, it fired. You put it on the ground, it fired. You looked at it funny, it emptied the mag.

Thank you for the info.